300-410 詢問這些題目的正確答案
本帖最后由 junejune 于 2022-8-19 15:59 编辑詢問這些題目><題庫內的答案 與太多網站的答案都不一樣....
問題1Whichconfiguration feature should be used to block rogue router advertisementsinstead of using the IPv6 Router Advertisement Guard feature?A. VACL blocking broadcast frames from nonauthorizedhosts.B. PVLANs with promiscuous ports associated to routeadvertisements and isolated ports for nodes.C. PVLANs with community ports associated to routeadvertisements and isolated ports for nodes.D. IPv4 ACL blocking route advertisements fromnonauthorized hosts.------------------------------------------------------------------------------------------------------問題2
Refer to the exhibit.https://bbs.hh010.com/data/attachment/forum/202208/19/154302qj0k2kmkbkvbmrk2.png
The control plane is heavily impacted after the CoPP configuration is appliedto the router.
Which command removal lessens the impact on the control plane?A. access-list 120 permit udp any any eg pim-auto-rpB. access-list 120 permit eigrp any host 224.0.0.10C. access-list 120 permit ospf anyD. access-list 120 permit tcp any gt 1024 eg bap log
------------------------------------------------------------------------------------------------------問題3
Referto the exhibit.
https://bbs.hh010.com/data/attachment/forum/202208/19/154417dz4b8jv35ro8pr78.png
A network administrator must block ping from user 3 to the App Server only.
An inbound standard access list is applied to R1 interface G0/0 to block ping.
The network administrator was notified that user 3 cannot even ping user 9anymore.
Where must the access list be applied in the outgoing direction to resolve theissue?A. R2interface Gi 1/0B. R2interface Gi 0/0C. SW1interface Gi 1/10D. SW1interface Gi 2/21------------------------------------------------------------------------------------------------------問題4
Referto the exhibit.https://bbs.hh010.com/data/attachment/forum/202208/19/154438v4cpczjhqz9klz14.png
R1 and R2 are configured for EIGRP peering using authentication and theneighbors failed to come up.
Which action resolves the issue?A.Configure a matching key-id number on both routersB.Configure a matching authentication type on both routerC. Configurea matching key-chain name on both routersD.Configure a matching lowest key-id on both routers------------------------------------------------------------------------------------------------------問題5Referto the exhibit.
https://bbs.hh010.com/data/attachment/forum/202208/19/154428mlaoddlv0ool5hlu.png
An engineer is troubleshooting a failed Telnet session from PC to the DHCPserver.
Which action resolves the issue?A.Remove sequence 30 and add it back to the IPv6 traffic filter as sequence 5.B.Remove sequence 20 and add it back to the IPv6 traffic filter as sequence 5.C.Remove sequence 10 to add the PC source IP address and add it back as sequence10.D.Remove sequence 20 for sequence 40 in the access list to allow Telnet.------------------------------------------------------------------------------------------------------
問題6Referto the exhibit.
https://bbs.hh010.com/data/attachment/forum/202208/19/154452iifiukfulu8usxn0.png
AS 111 mut not be used as a transit AS, but ISP-1 is getting ISP-2 routes fromAS 111.
Which configuration stops Customer AS from being used as a transit path onISP-1?A. ipas-path access-list 1 permit ^$
B. ip as-path access-list 1 permit_111_
C. ip as-path access-list 1 permit."
D. ip as-path access-list 1 permit ^111$------------------------------------------------------------------------------------------------------問題7Whichtwo components are required for MPLS Layer 3 VPN configuration? (Choose two) A. Use pseudowire for Laver 2 routes.B. Use MP-BGP for customer routes.C. Use OSPF between PE and CE.D. Use a unique RD per customer VRF.E. Use LDP for customer routes.------------------------------------------------------------------------------------------------------問題8Referto the exhibit:
https://bbs.hh010.com/data/attachment/forum/202208/19/154501usq1eeseswlxe0ws.png
After recovering from a power failure. Ethernet0/1 stayed down whileEthernet0/0 returned to the up/up state.
The default route through ISP1 was not reinstated m the routing table untilEthernet0/1 also came up.
Which action resolves the issue?A.Reference the track object 1 in both static default routes.B.Remove the references to the interface names from both static default routes.C.Configure the default route through ISP1 with a higher administrative distancethan 2.D. Adda static route to the 8.8.8.8/32 destination through the next hop 203.0.113.1.------------------------------------------------------------------------------------------------------問題9Referto the exhibit.
https://bbs.hh010.com/data/attachment/forum/202208/19/154514j9lqld6z19avark9.png
The ISP router is fully configured for customer A and customer B using theVRF-Lite feature.
What is the minimum configuration required for customer A to communicatebetween routers A1 and A2??A. A1:
interface fa0/0
description To->ISP
ip vrf forwarding A
ip add 172.31.100.1 255.255.255.0
no shut
!
router ospf 100
net 172.31.100.1 0.0.0.255 area 0
A2:
interface fa0/0
description To->ISP
ip vrf forwarding A
ip add 172.31.200.1 255.255.255.0
no shut
!
router ospf 100
net 172.31.200.1 0.0.0.255 area 0 B.A1:
interface fa0/0
description To->ISP
ip add 172.31.200.1 255.255.255.0
no shut
!
router ospf 100
net 172.31.200.1 0.0.0.255 area 0
A2:
interface fa0/0
description To->ISP
ip add 172.31.100.1 255.255.255.0
no shut
!
router ospf 100
net 172.31.100.1 0.0.0.255 area 0 C. A1:
interface fa0/0
description To->ISP
ip vrf forwarding A
ip add 172.31.100.1 255.255.255.0
no shut
!
router ospf 100 vrf A
net 172.31.100.1 0.0.0.255 area 0
A2:
interface fa0/0
description To->ISP
ip vrf forwarding A
ip add 172.31.200.1 255.255.255.0
no shut
!
router ospf 100 vrf A
net 172.31.200.1 0.0.0.255 area 0 D. A1:
interface fa0/0
description To->ISP
ip add 172.31.100.1 255.255.255.0
no shut
!
router ospf 100
net 172.31.100.1 0.0.0.255 area 0
A2:
interface fa0/0
description To->ISP
ip add 172.31.200.1 255.255.255.0
no shut
!
router ospf 100
net 172.31.200.1 0.0.0.255 area 0------------------------------------------------------------------------------------------------------Question10 What are two characteristics of VRF instance? (Choosetwo)A . All VRFs share customers routing and CEF tablesB . Each VRF has a different set of routing and CEFtablesC . An interface must be associated to one VRFD . A customer site can be associated to different VRFsE . It is defined by the VPN membership of a customersite attached to a P device 谢谢！！！ {:6_267:}{:6_267:} {:6_278:}
页:
[1]