acscs 发表于 2024-1-12 18:02:39

ＨＣＩＡ实验ＯＳＰＦ命令

The device is running!

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
un in e
Info: Information center is disabled.
int g 0/0/0
ip ad 1.1.1.1 24
q
ospf 1
rou       
a 0
r       
ro       
n       
net       
network1.1.1.1 24
                                             ^
Error: Wrong parameter found at '^' position.
network 1.1.1.1 0.0.0.255
q
q\
               ^
Error: Unrecognized command found at '^' position.
q
dis ospf peer

       OSPF Process 1 with Router ID 1.1.1.1
               Neighbors

Area 0.0.0.0 interface 1.1.1.1(GigabitEthernet0/0/0)'s neighbors
Router ID: 2.2.2.2          Address: 1.1.1.2         
   State: FullMode:Nbr isMasterPriority: 1
   DR: 1.1.1.1BDR: 1.1.1.2MTU: 0   
   Dead timer due in 40sec
   Retrans timer interval: 5
   Neighbor is up for 00:00:10   
   Authentication Sequence: [ 0 ]



Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

<Huawei>

whx991021 发表于 2024-1-16 08:25:49

谢谢大佬分享，非常有用，共同进步，学习学习

shangd 发表于 2024-1-16 15:20:17

谢谢无偿献血！

CHT5011 发表于 2024-1-18 13:19:09

{:6_264:}{:6_264:}{:6_264:}{:6_264:}{:6_269:}

zjd612 发表于 2024-2-19 16:30:57

感谢楼主分享

nihoama123 发表于 2024-2-20 10:49:42

多熟练联系
页: [1]
查看完整版本: ＨＣＩＡ实验ＯＳＰＦ命令